Habibler clinic Dental Aesthetics
Book a consultation
Language TR EN

Cosmetic dentistry · Full crowns

Zirconia Crowns in Istanbul, Turkey

A large filling, a fracture or a root canal has left a tooth weak, or an old metal-backed crown shows a grey line at the gum. A zirconia crown covers the whole tooth and protects it.

White zirconia crown and bridge on a model in front of a digital scan on screen

Overview

In short

A zirconia crown is a white, metal-free ceramic cap that covers every surface of a tooth. It suits teeth that are heavily filled, root-treated or carry heavy chewing loads. Compared with a metal-backed crown, it doesn't leave a grey shadow at the gum line and lets light through more naturally.

Zirconia is one of the strongest dental ceramics, which is why it is the usual choice for back teeth, bridges and crowns on implants. The trade-off is that more tooth has to be removed than for a veneer, so we only recommend a crown where the tooth needs one. Many patients ask on their first call if their front teeth should be zirconia too; it depends on the tooth, and we compare the options below.

How it works: 4 steps

  1. X-ray and a first opinion. Send an X-ray or photos; we review the tooth and draft a written plan.
  2. Preparation and digital scan. The tooth is shaped just enough for the crown and scanned digitally.
  3. Temporary crown, lab work. You wear a temporary crown while the zirconia is made from your scan.
  4. Try-in and fitting. The crown is tried in, fitted with your approval and the bite adjusted.

From our dentist

Crowns, explained by our dentist

Dr. Emir Hacıoğlu on the cases where a full crown rebuilds strength as well as appearance.

  • Part 2 · Crowns

    When crowns are the better choice

    Broken or heavily worn teeth, extensive tissue loss and bite problems need more than a surface layer. A full crown rebuilds strength as well as appearance.

Your treatment, step by step

From X-ray to your permanent crown

  1. Day 1 · In the clinic

    Examination, X-ray and your plan

    • The tooth itself. An X-ray shows the root, bone and nerve. Decay or old filling under the future crown is removed first, and root canal treatment is added to the plan if the nerve needs it.
    • Type of zirconia. Back teeth get a dense, high-strength zirconia; front teeth get a multilayered type that lets more light through.
    • Written plan. The number of crowns or bridges, any treatment needed first and the cost are given in writing before you agree to anything.
  2. Preparation day · Clinic

    Preparation, digital scan and temporary crown

    • Local anaesthetic. Living teeth are numbed. You stay awake and feel vibration and pressure rather than pain.
    • Shaping. The tooth is reduced evenly on every side, just enough to make room for the crown. Nothing more is taken; the aim is to keep as much sound tooth as possible.
    • Scan and shade. The impression is taken with an intraoral scanner and the shade chosen in daylight against your neighbouring teeth. A temporary crown goes on the same day.
  3. If needed · Mid-stage try-in

    Checking bridges and multiple crowns

    For bridges or several crowns, the work is tried in your mouth part-way through production. The fit at the margins, how the bridge seats and the bite are checked, and any correction is made in the laboratory.

    For front teeth, the shape and length can first be tested with a mock-up, using the same principles as a smile design.

  4. Fitting day · In the clinic

    Try-in, fitting and bite adjustment

    • Final try-in. The crown is tried in before it is cemented; we check the colour, edges and contact points with you.
    • Fitting. With your approval it is fixed permanently and excess cement is cleaned away.
    • Bite and polish. The bite is adjusted and the adjusted surfaces polished again. Well-polished zirconia is kinder to the opposing teeth.
  5. Afterwards · At home

    Caring for the crown and the tooth beneath

    Zirconia itself can't decay, but the tooth underneath can if plaque builds up at the margin. Floss or interdental brushes, six-monthly check-ups and, if you clench, a night guard make the biggest difference to how long a crown lasts.

Your treatment journey

Zirconia crowns: your trips, step by step

From your first message to your last check-up, we plan every step with you.

  1. 1Online · WhatsApp

    Send your X-ray

    Tell us which tooth is the problem and send any recent X-ray or a photo of the old crown. You get a written draft plan before booking travel.

    • Open every day 10:00–22:00
    • X-ray reviewed first
    • Written plan before booking
  2. 2Istanbul · Days 1–2

    Examination and preparation

    X-ray and examination, then the tooth is prepared under local anaesthetic and scanned. You leave with a temporary crown the same day.

    • X-ray on the day
    • Digital scan of the tooth
    • Temporary crown the same day
  3. 3Istanbul · Days 3–5

    Laboratory days

    Your crown is milled from the scan and finished in the laboratory. Bridges may have a try-in during these days; otherwise your time is your own.

    • Crown made from your scan
    • Try-in for bridges
    • Free time in the city
  4. 4Istanbul · Home

    Fitting and home

    The crown is tried in, fitted and the bite adjusted before you fly. We follow up by photo or video once you are home.

    • Your approval before fitting
    • Bite checked before you fly
    • Remote follow-up

Who it suits

Are zirconia crowns right for you?

This list gives a first idea; your dentist decides after the examination and X-ray.

Usually a good fit if…

  • A tooth is weakened by a large filling or a fracture
  • A root-treated tooth needs protecting
  • You want to replace old metal-backed crowns
  • A back tooth or a bridge has to take heavy chewing forces
  • A crown or bridge is going onto an implant
  • You are sensitive to metal

Worth talking it through first if…

  • The front tooth is sound and only colour or shape bothers you → porcelain veneers need far less tooth removed
  • Looks come first on a front tooth that takes little load → an E-max crown can let light through more naturally
  • The tooth can't be saved → a single tooth implant with a zirconia crown is considered
  • Your gums bleed or are receding → gum treatment comes first

Not sure? Send us an X-ray or photos. After reviewing them, your dentist tells you honestly whether this treatment suits you and what the alternatives are.

Comparison

Zirconia, E-max and metal-backed porcelain

All three are full crowns; the choice depends on where the tooth is and how much load it takes. On a single front tooth E-max can look more lifelike, while metal-backed porcelain is still an option for some long bridges or when budget leads.

Feature Zirconia E-max Metal-backed porcelain
Core No metal No metal; glass ceramic Porcelain over a metal frame
Light transmission Good; higher in front-tooth types Very high, closest to enamel Low; the metal blocks light
Strength Very high; back teeth and bridges High; front teeth and single crowns High; the porcelain layer can chip
Gum margin No grey line No grey line A grey line may show over time
Masking a dark tooth Masks well Masks with an opaque type Masks well

Recovery

The first days, and flying home

For a few days after preparation, cold sensitivity and slight soreness of the gum around the tooth are normal. Most people stop noticing the crown within a few days of fitting. No surgery is involved, so flying the next day is generally fine; your dentist confirms.

WhenWhat to expect
Preparation dayNumb for a few hours; the gum edge may feel slightly sore
Temporary daysCold sensitivity is possible; avoid hard and sticky food
After fittingThe bite may feel different at first; a high spot is adjusted
First monthSensitivity usually fades and normal chewing returns

What stays the same

With a zirconia crown you can eat normally and drink coffee and tea; the surface doesn't stain. If anything feels wrong after you fly home, send us a photo; our aftercare page explains follow-up at a distance.

What you can do

  • Don't eat until the numbness wears off, and take care not to bite your cheek
  • Avoid chewing gum and sticky sweets with the temporary crown
  • Clean around the crown edge daily with floss or an interdental brush
  • Take the pain relief your dentist suggests only if needed, as directed
  • Wear your night guard every night if one was made for you

Contact us straight away if…

  • The temporary crown comes off; don't leave the tooth uncovered for long
  • The crown feels high or hurts when you bite
  • Sensitivity turns into throbbing pain or wakes you at night
  • The gum around the crown swells
+90 505 196 17 35

Risks

Risks, listed honestly

Zirconia crowns are a well-established, predictable treatment. Most of the risks come from preparing the tooth and from day-to-day care, and we want you to know them in advance.

  • More tooth is removed

    A full crown means reducing the tooth on every side, and that can't be reversed. So we don't offer zirconia crowns on sound teeth that a veneer could treat.

  • Sensitivity and nerve inflammation

    Temporary sensitivity after preparation is common. Occasionally the nerve becomes inflamed, and root canal treatment may then be needed.

  • Decay at the margin

    If plaque builds up along the crown edge, the tooth beneath can decay. Daily flossing and six-monthly check-ups catch it early.

  • Wear on the opposing tooth

    A rough zirconia surface can wear the tooth it bites against. We polish again after every bite adjustment and check it at reviews.

  • Chipping of a layered crown

    Where porcelain is layered over zirconia, heavy clenching can chip that layer. For people who clench we prefer solid (monolithic) zirconia and a night guard.

Plan and cost

What do zirconia crowns cost in Turkey?

It depends on the condition of the tooth and any treatment needed first, so we don't quote before seeing an X-ray. You receive a written, itemised plan before you book travel; see our price list and treatment packages.

What changes the cost

  • How many teeth are crowned, and whether there is a bridge
  • The type of zirconia: multilayered for front teeth, or solid
  • Root canal treatment, fillings or removal of old crowns
  • Whether the crown goes on a natural tooth or an implant
  • Smile design and a mock-up for front teeth

Questions worth asking

  • Are the temporary crown and review appointments included?
  • Is removing my old crowns included in the plan?
  • How many try-ins will a bridge need, and over how many days?
  • What happens if there's a problem at a margin after I'm home?

Only if needed

  • Root canal treatment (if the nerve is damaged)
  • A core build-up or filling under the crown
  • Night guard (if you clench or grind)

Check-ups

A bite check before you fly, a remote follow-up once you are home, then a check-up and professional clean every six months.

Get your written plan

FAQ

Zirconia crowns: your questions

Yes. With no metal inside, light passes through the crown and there's no grey shadow at the gum line. For front teeth we use multilayered types that let more light through, with a shade gradient closer to a natural tooth. The shade is chosen with you, next to your neighbouring teeth, in daylight rather than under the clinic lights.

Neither is better across the board; they answer different problems. Zirconia leads for back teeth, bridges and heavy chewing loads. E-max leads on a single front tooth where the most lifelike translucency matters. Both can be used in the same mouth, and many of our plans combine them, with E-max at the front and zirconia further back.

Most cases are finished in one trip of about five to seven days, over two or three appointments, because the crown is designed and milled from a digital scan. Root canal treatment, removing old crowns or treating the gums first can lengthen the stay. We send you the schedule in writing before you book flights, so there are no surprises on arrival.

No, and the difference matters. A crown covers the whole tooth, so the tooth is reduced on every side; a veneer covers only the front surface and usually needs just a thin layer of enamel. Many “Turkey teeth” stories involve healthy teeth being crowned. We crown a tooth only when it is already weakened, by a large filling, a fracture or a root canal, and suggest veneers or whitening when they can do the job.

Its high fracture resistance makes zirconia a common choice for people who grind. We still recommend a night guard, because grinding strains the opposing teeth and the jaw joint more than the crown itself. For grinders we choose solid zirconia rather than a crown with a layered porcelain surface, which is more likely to chip.

Zirconia can't decay, but the tooth beneath can if plaque builds up at the margin. Most of the problems we see on crowned teeth start at that edge. Floss or interdental brushes and check-ups every six months, with your own dentist or with us, lower the risk considerably.

Yes. The old crown is carefully removed and the tooth underneath checked; any decay is cleaned and, if needed, root canal treatment is done. Then a new scan is taken and the zirconia crown made. A grey edge caused by the metal disappears; discolouration of the root or gum is assessed separately and may not change.

Generally yes. Crown work doesn't leave a surgical wound, so most patients fly the day after fitting once the bite has been checked; your dentist confirms. If the crown later feels high, or the gum around it gets sore, send us a photo on WhatsApp. Many of these issues can be assessed remotely, and we plan the next step with you.

This page is for information only and does not replace an examination. Your dentist decides on the right treatment after an examination and the necessary imaging.

Why Habibler Clinic

At our clinic in Istanbul

  • 3D CBCT and digital scanningYour plan starts from measurements: CBCT imaging and a digital intraoral scan are done at the clinic.
  • Every stage under one roofFrom surgery to prosthetics and cosmetic work, the same clinical team looks after your case.
  • Separate sterilisation roomInstruments are prepared for every patient in a dedicated sterilisation room.
  • Written plan before you travelSteps, number of trips and cost are put in writing before you book flights.
International patients

Have a question about your treatment?

Send your records and receive a written plan — usually within one working day.