Cosmetic dentistry · Front-tooth crowns
E-max Crowns in Istanbul, Turkey
One front tooth is chipped, filled or a different colour from the rest. A glass-ceramic crown that lets light through like enamel can bring it back in line with its neighbours.
Overview
In short
An E-max crown is a metal-free crown made from lithium disilicate, a strong glass ceramic. It suits front teeth that are chipped, moderately filled or a different colour from their neighbours. The key difference from zirconia: it lets more light through and is bonded chemically to the tooth with an adhesive.
The same material can be made as a full crown, a veneer or an onlay (a partial crown that replaces only the missing part of a tooth), depending on how much sound tooth is left. At our clinic we reach for E-max most often when a single front tooth has to match the natural teeth either side, one of the hardest jobs in cosmetic dentistry.
How it works: 4 steps
- Photos and a first opinion. Send a close daylight photo and any X-ray; we draft a written plan before you travel.
- Shade mapping and preparation. Your neighbours' shade is recorded in detail; the tooth is shaped and scanned.
- Lab work and shade details. The crown is made in glass ceramic and the shade details are layered on.
- Try-in and bonding. Once you approve the colour, the crown is bonded to the tooth with adhesive.
Your treatment, step by step
From shade mapping to bonding
-
Day 1 · In the clinic
Examination, shade mapping and the right form
- The tooth. An X-ray and examination show how much sound tooth is left and whether the nerve is healthy.
- Shade map. Your neighbouring teeth are photographed in detail rather than as a single shade: the translucent edge, the darker neck and any small marks.
- Choosing the form. A sound front surface gets a veneer; a tooth with more missing gets a full crown; a back tooth missing one cusp gets an onlay. We choose the form that removes the least tooth.
-
Preparation day · Clinic
Preparation, digital scan and temporary
- Local anaesthetic. Living teeth are numbed; you feel vibration rather than pain.
- Shaping. The tooth is prepared only as much as the chosen form needs. A veneer takes the least, a full crown more.
- Scan and temporary. The impression is taken with a digital scanner and a temporary goes on the same day. If several front teeth are involved, a smile design and mock-up come first.
-
Laboratory · A few days
Making the crown and adding the details
The crown is designed digitally and made from a block of glass ceramic. In the laboratory, fine layers of colour and translucency are then added to match the shade map we recorded.
On a dark or root-treated tooth, a more opaque type is chosen so the colour underneath doesn't show through.
-
Bonding day · In the clinic
Try-in, adhesive bonding and bite
- Shade try-in. The crown is tried in with a coloured try-in paste and we look at it together in daylight. If the match isn't right, it goes back to the laboratory.
- A dry field. Adhesive bonding is sensitive to moisture, so the tooth is isolated and kept clean and dry.
- Bonding. The crown is bonded chemically to the tooth, and this bond strengthens crown and tooth together. Excess material is cleaned away.
- Bite and polish. Your bite and jaw movements are adjusted and the edges polished.
-
Afterwards · At home
Looking after the crown
An E-max crown is brushed like a natural tooth. Glass ceramic's weak point is sudden impact, so not biting hard objects with your front teeth and, if you clench, wearing a night guard help it last longer.
Your treatment journey
E-max crowns: your trips, step by step
From your first message to your last check-up, we plan every step with you.
-
Send your photos
Tell us which tooth bothers you and why; a close-up smile photo taken in daylight helps most. You get a written draft plan before booking travel.
- Open every day 10:00–22:00
- Daylight photo reviewed
- Written plan before booking
-
Shade and preparation
Examination, X-ray and detailed shade photos, then the tooth is prepared and scanned. You leave with a temporary the same day.
- X-ray on the day
- Detailed shade record
- Temporary the same day
-
Laboratory days
The crown is made and characterised to your shade map. A single-tooth match may need an extra try-in, planned within the same stay.
- Shade details added
- Extra try-in if needed
- Free time in the city
-
Bonding and home
After a shade try-in in daylight, the crown is bonded and the bite adjusted. We follow up by photo or video once you're home.
- Colour approved in daylight
- Adhesive bonding
- Remote follow-up
Who it suits
Is an E-max crown right for you?
This list gives a first idea; your dentist decides on the form and material after the examination.
Usually a good fit if…
- A single front tooth needs to match the natural teeth beside it
- A front tooth has a moderate filling or a chip
- Old crowns look opaque and flat and you want to replace them
- A premolar needs a single crown or an onlay
- Your gums are healthy and don't bleed
Worth talking it through first if…
- The front surface is sound and only colour or shape bothers you → porcelain veneers remove less tooth
- A molar, a bridge or heavy grinding is involved → zirconia crowns are stronger
- One tooth is dark but the enamel is sound → whitening options are discussed first
- Your gums bleed → gum treatment comes first, because adhesive bonding needs a dry field
Not sure? Send us an X-ray or photos. After reviewing them, your dentist tells you honestly whether this treatment suits you and what the alternatives are.
Comparison
E-max crown, zirconia crown and porcelain veneer
E-max sits between looks and strength. If the front surface of the tooth is sound, a veneer gives the same look with less tooth removed; for back teeth and bridges, zirconia is the safer choice.
| Feature | E-max crown | Zirconia crown | Porcelain veneer |
|---|---|---|---|
| What it covers | The whole tooth | The whole tooth | Only the front surface |
| Translucency | Very high | Good; higher in front-tooth types | Very high; the tooth beneath shows |
| Strength | High; front teeth and premolars | Very high; back teeth and bridges | High when bonded to sound enamel |
| Tooth surface | Reduced as for a full crown | Reduced as for a full crown | Usually a thin layer of enamel |
| Fixing | Adhesive; needs a dry field | Adhesive or conventional cement | Adhesive; needs a dry field |
Recovery
The first days, and flying home
A few days of cold sensitivity and slight soreness at the gum edge are normal after preparation. Once the crown is bonded, most patients can't tell it from their own tooth within a week. No surgery is involved, so flying the next day is generally fine; your dentist confirms.
| When | What to expect |
|---|---|
| Preparation day | Numb for a few hours; lukewarm, soft food with the temporary |
| Temporary days | Cold sensitivity is possible; don't bite hard or sticky food at the front |
| After bonding | Your tongue notices the new surface; the bite feels natural within days |
| First month | Sensitivity usually fades; edges and bite are checked at follow-up |
What stays the same
An E-max crown doesn't change how you eat, talk or drink coffee and tea; glass ceramic doesn't stain. If a problem appears once you're home, send us a photo; our aftercare page explains follow-up at a distance.
What you can do
- Avoid hard and sticky food on bonding day
- Don't crack seeds, nutshells or ice with your front teeth
- Clean the crown edge every day with a soft brush and floss
- Use the toothpaste your dentist suggests, not abrasive powders
- Wear your night guard every night if you clench
Contact us straight away if…
- The temporary comes off or breaks
- You notice a crack in the crown or a chip at the edge
- The crown feels high or hurts when you bite
- Sensitivity gets worse over a few days instead of settling
Risks
Risks, listed honestly
On the right tooth, in the right place, E-max serves for many years. Its risks mostly come from using it where it doesn't belong, or from poor bonding conditions.
-
Fracture
Glass ceramic is more brittle than zirconia. So we don't recommend it for heavy grinders or molars, and we protect front teeth with a night guard where needed.
-
Bonding failure
Adhesive bonding is affected by moisture and bleeding. If the gums aren't healthy we treat them first, and we bond only in a clean, dry field.
-
Shade mismatch
A very dark tooth can show through thin ceramic. We predict this from the shade map and choose an opaque type or a different material where needed.
-
Sensitivity
Cold sensitivity for a few days after preparation is common. Occasionally the nerve becomes inflamed, and root canal treatment may then be needed.
-
Staining at the margin
Over the years a thin line can appear along the bonding edge. Polishing at check-ups and good home care usually prevent it.
Plan and cost
What do E-max crowns cost in Turkey?
It depends on how many teeth are treated and which form each needs, so we don't quote before seeing photos or an X-ray. You receive a written, itemised plan before you book travel; see our price list and treatment packages.
What changes the cost
- How many teeth are treated
- The form: full crown, veneer or onlay
- An extra shade try-in for a single-tooth match
- Removing an old crown, or a filling in the tooth first
- A smile design and mock-up when several front teeth are involved
Questions worth asking
- Are the temporary and the shade try-in included?
- What happens if the shade doesn't match?
- Is a night guard included if I need one?
- How many days in Istanbul, and on which dates?
Only if needed
- Whitening first (to set the shade of the neighbouring teeth)
- Root canal treatment (if the nerve is damaged)
- Night guard (if you clench or grind)
Check-ups
A bite check before you fly, a remote follow-up once you're home, then a check-up, clean and edge polish every six months.
Get your written planFAQ
E-max crowns: your questions
Because it lets light through much like natural enamel and can be coloured in fine layers. That means the translucent edge and the slightly darker neck of a crown can be made to resemble the tooth next to it. On a front tooth, especially when one tooth has to match its neighbours, the difference is visible in everyday light.
On a single front crown, E-max usually looks more lifelike. The more translucent types of zirconia also give a good result and are stronger. We choose by looking at where the tooth is, how you bite and the colour of the tooth underneath, and the two are often used together in the same mouth.
Yes; single-tooth matching is where E-max is strongest. It's also what our patients worry about most, because the new crown has to blend with a natural tooth on each side. We record the shade with detailed photos and, if needed, plan an extra shade try-in before bonding, within the same stay.
Not quite. E-max is a material and a veneer is a form; veneers can be made from E-max too. An E-max crown wraps the whole tooth and needs more preparation, so if the front of your tooth is sound we suggest a veneer instead. Choosing the form that removes the least tooth is how we avoid over-treating healthy teeth.
It isn't expected to break in normal eating and talking. Biting hard objects, a knock to the mouth or heavy grinding can crack it. If you grind, we recommend a night guard, and for molars and bridges we prefer the stronger zirconia. A small chip at the edge can often be polished smooth.
Yes. A more opaque type of E-max is used to hide the dark colour underneath. If the difference is very marked, zirconia is also considered. We decide after seeing the colour and structure of the tooth at the examination; the aim is a crown that looks neither greyer nor whiter than its neighbours.
The glass ceramic surface doesn't pick up stains from coffee, tea or smoking. What can change over the years is the colour of your natural teeth beside it. So if you're thinking about whitening in future, it's best to talk about it before the crown is made and do the whitening first.
Most cases need one trip of about five to seven days: examination, shade mapping and preparation first, then laboratory days, then try-in and bonding. A single-tooth match may need an extra try-in, which we fit into the same stay. With no surgical wound, flying the day after bonding is generally fine; your dentist confirms.
This page is for information only and does not replace an examination. Your dentist decides on the right treatment after an examination and the necessary imaging.
Why Habibler Clinic
At our clinic in Istanbul
- 3D CBCT and digital scanningYour plan starts from measurements: CBCT imaging and a digital intraoral scan are done at the clinic.
- Every stage under one roofFrom surgery to prosthetics and cosmetic work, the same clinical team looks after your case.
- Separate sterilisation roomInstruments are prepared for every patient in a dedicated sterilisation room.
- Written plan before you travelSteps, number of trips and cost are put in writing before you book flights.
Other treatments
All treatments-
Zirconia Crowns
Strong, metal-free full crowns for weakened teeth, back teeth, bridges and implants.
-
Porcelain Veneers
Thin ceramic shells on the front of sound teeth; most of the natural tooth stays exactly as it is.
-
Smile Makeover
Shade, shape and gum line planned as one design; you see and test it in your mouth before any tooth is touched.
Have a question about your treatment?
Send your records and receive a written plan — usually within one working day.